2 Position, 4 Way Push to Shift Manual Valve
Note: This product is no longer available - please contact us for further assistance.
Hydraulic Valves
2 Way Poppet Type Solenoid Valve
Parker's 2-way poppet solenoid valves check flow in one direction with very low leakage and free flow opposite; normally-open or normally-closed configurations available. Capable of pressures up to 350 bar (5000 psi) and flows up to 260 lpm (70 gpm).
2-Way High-Response Valve - Series TDP
The pilot operated 2-way high response valves series TDP provide a precise control of high flows at maximum dynamics. Typical applications for these slip-in cartridge proportional throttle valves are die cast, injection molding and hydraulic presses.
2-Way Slip-In Cartridge Valve - Series R06M / RS06M
The pilot valves with pressure relief function series R06M for subplate mounting and RS06M for sandwich plate mounting in size NG06 are part of the wide Parker pilot control range for DIN cartridge valves.
2-Way Slip-In Cartridge Valve - Series RPDM
The pilot valve with proportional relief function series RPDM for sandwich mounting is a part of the wide Parker pilot control range for DIN cartridge valves. It provides a fast response time and low pressure drop due to its powerful solenoid.
2-Way Slip-In Cartridge Valve - Series SVLA
The hydraulically pilot operated check valve for subplate mounting series SVLA in size NG06 is proven part of the wide Parker pilot control range for DIN cartridge valves.
2-Way Slip-In Cartridge Valves - Series UR06M / US06M
The pilot valves with unloading function series UR06M for subplate mounting and US06M for sandwich plate mounting in NG06 are part of the wide Parker pilot control range for DIN cartridge valves.
2-Way Variable Flow Control Valve - Series 2F1C
2-way flow control valves series 2F1C in size NG 10 and NG16 provide a pressure and viscosity compensated flow. Additionally they avoid unintended initial actuator motion.
2 Way Flow Control Proportional Valves
Parker offers an extensive range of 2-way flow control proportional valves through the use of Current Controlled Pulse Width Modulation (PWM) valve drivers with flow capabilities up to 227 lpm (60 gpm) and pressures as high as 210 bar (3000 psi).
2 Way Spool Type Solenoid Valve
Parker’s selection of direct acting 2-way, 2-position spool-type solenoid valves cover a wide range of flows up to 75 lpm (20 gpm) and pressures as high as 350 bar (5000 psi), with both normally-closed and normally-open options available.
2-Way Flow Control Valve - Series GFG2
2-way flow control valves series GFG provide pressure compensated flow for a precise movement control. The valve design largely compensates temperature variations.
2-Way High Performance Proportional Throttle Valve - Series TDC
The new Parker 2-way high performance proportional throttle valves series TDC are characterized by a precise control of high flows at high dynamics. Typical applications for TDC slip-in cartridge valves are injection molding and hydraulic presses.
2-Way Slip-In Cartridge Valve - Series CE, CP
2-way slip-in cartridge valves series CE and CP are hydraulically controlled seat valves which are universally applicable. The complete modular system covers all sizes.
2-Way Slip-In Cartridge Valve - Series ZUDB
As a part of Parker's comprehensive modular DIN cartridge system, the sandwich valve with pressure relief function series ZUDB provides maximum flexibility in building pressure functions.
3 Way Flow Control Proportional Valves
Parker selection of normally-closed 3-way flow control proportional valves used with Current Controlled Pulse Width Modulation (PWM) valve drivers have flow capabilities up to 75 lpm (20 gpm) and pressures as high as 210 bar (3000 psi).
3 Way Rotary Type Manual Valve
REGIONAL - Parker’s manually operated 3-way, 2 or 3-position directional control spool valve is capable of flows up to 23 lpm (6 gpm) and pressures as high as 240 bar (3500 psi). Knob and lever actuators are available with detents.
3-Way High-Response Valve - Series TPQ
Parker's 3-way high-response cartridge valves series TPQ provide high flow control at maximum dynamics. They are predestined for demanding applications like injection molding and die cast.
2 Position, 2 Way Normally Closed Poppet Type Manual Valve
REGIONAL - Parker’s 2-position, 2-way normally-closed manual poppet valves are available with stem, knob, or lever actuators and are capable of flows up to 49 lpm (13 gpm) and pressures as high as 210 bar (3000 psi).
2 Position, 2 Way Normally Open Poppet Type Manual Valve
Note: This product is no longer available - please contact us for further assistance.
2-Way High-Response Valve with Shut-Off Valve - Series TEP
2-way high-response valves series TEP in cartridge design base on the TDP range and provide a precise control of high flows at maximum dynamics. Additionally, TEP valves are equipped with a direction control valve for shutting off the pilot system.
2-Way Slip-In Cartridge Valve - Series DSBA100
The pilot valves with preload function series DSBA100 in NG06 are part of the wide Parker pilot control range for DIN cartridge valves. They are available in two versions for subplate mounting or sandwich plate mounting.
2-Way Slip-In Cartridge Valve - Series ZSRA/ ZSRB
The shuttle valves for sandwich plate mounting series ZSRA and ZSRB in size NG06 are part of the wide Parker pilot control range for DIN cartridge valves.
3 Way Pilot Operated Directional Control Valves
3-way Pilot Operated, Threaded Cartridge Spool Valves used in normally closed or normally open directional control three way circuits requiring remote pilot actuation.
3/2 Way Seated Type Directional Control Valve - Series D1SE
The proven seated type directional control valve series D1SE in size NG06 is almost leakage-free and can be used for a wide range of hydraulic applications.
2 Way Pilot Operated Directional Control Valves
A pilot-operated, cartridge style screw-in hydraulic directional valve used in two way circuits with remote pilot actuation. Available in both normally-open and normally-closed orientation.
2 Way Poppet Type Bi-Directional Solenoid Valve
Parker’s 2-way bi-directional poppet solenoid valves block flow both directions with very low leakage and are available in normally-open or normally closed configurations. Capable of pressures up to 350 bar (5000 psi) and flows up to 285 lpm (75 gpm).
2-Way Cartridge Check Valve - Series C1DB
The check valve series C1DB is a ready-for-use cartridge valve using proven components of Parker's modular DIN cartridge system. It provides a wide range of options and is particularly suitable for a compact manifold block installation.
2-Way Slip-In Cartridge Valve - Series S06M
The pilot valve for pressure sequence function series S06M in size NG06 is a proven component of the wide Parker pilot control range for DIN cartridge valves.
2-Way Slip-In Cartridge Valve - Series TDW
The series of active pilot operated 2/2 way throttle valves TDW enables fast and safe switching operations. The valves in cartridge design are supplied as one unit to ensure easy installation.
Motor Control Valves
Note: This product is no longer available - please contact us for further assistance.
Hydraulically Pilot Operated Check Valve - Series SVLB
The hydraulically pilot operated check valve series SVLB is based on Parker's comprehensive modular DIN cartridge system. It is mainly used to shut-off the cylinder.
In-line Flow Control Valve – F Series
The Colorflow F series of hydraulic flow control valves permits free flow in one direction and metered flow in the reverse direction. This flow control valve is used in air and oil applications.
OBSOLETE: Pilot Operated Check Valve, SAE Flange - Series C5P
This product is no longer available – please contact us for further assistance.
Pilot Operated Check Valve - Series ZRE
Parker's pilot operated check valves series ZRE are designed for maximum flow rates up to 120 l/min and long lifetime. They ensure a almost leak-free positioning of the actuator.
Pilot Operated Pressure Relief Valve, SAE Flange - Series R5V / R5V*P2
Parker pilot operated pressure relief valves series R5V and R5V*P2 provide an outstanding constant pressure behaviour. The SAE flanges allow to mount the valves directly on the flanges of pumps or actuators to achieve a very compact design.
Pilot Operated Proportional Pressure Relief Valve - Series R4V/R6V OBE
The pilot operated proportional pressure relief valves R4V/R6V OBE form a compact unit with the integrated electronics. They provide an excellent balanced pressure behaviour.
Pilot Operated Proportional Reducing Valve - Series VMY
Proportional pressure reducing valves series VMY in size NG10 and NG16 allow the variable adjustment of the reduced pressure from 0 bar up to the nominal pressure.
Pilot Operated Relief Valve with Free Reverse Check
REGIONAL - Parker’s pilot operated relief valves with reverse flow check are designed for continuous duty applications for working with pressures up to 420 bar (6000 psi) and flows up to 350 lpm (92 gpm).
Inline Shuttle Valves
REGIONAL - Parker's ball type inline shuttle valves are plumbed external from manifolds and line bodies and are available in two flow size options of 11 lpm (3 gpm) or 22 lpm (6 gpm), and pressures up to 207 bar (3000 psi).
Insert Check Valves
Parker’s ball and poppet style check valves are cartridges designed to be inserted inside manifolds and can handle flow up to 500 lpm (132 gpm) and pressures at 420 bar (6,000 psi) for circuit optimization and space savings.
Insert Shuttle Valves
Parker's insert type shuttle valves for countersinking inside manifolds are available as either poppet or ball type; capable of flows up to 38 lpm (10 gpm) and pressures up to 420 bar (6000 psi).
OBSOLETE: 2-Port Pressure Compensator, SAE Flange - Series R5A
This product is no longer available – please contact us for further assistance.
Pilot Operated Relief Valves
Parker’s pilot operated relief valves are designed for continuous duty applications featuring great stability with low pressure drop; working with pressures up to 420 bar (6000 psi) and flows up to 400 lpm (106 gpm).
Pilot Operated Sequence Valve with Reverse Check
REGIONAL - Parker's pilot operated sequence valve with reverse check combines two functions into a single cartridge reducing space, components, and manifold complexity. Capable of flows up to 70 lpm (32 gpm) and pressures up to 420 bar (6000 psi).
Pilot Operated Sequence Valves
Parker’s pilot operated sequence valves can be internally or externally piloted to allow multiple actuators to work in sequence based on pressure settings; working with flows up to 152 lpm (40 gpm) and pressures up to 380 bar (5500 psi).
Pilot Piston Style Pilot Operated Check Valves
Parker’s P.O. check valve’s allow flows up to 226 lpm (60 gpm) and pressure up to 350 bar (5,000 psi). Return flow can be enable by an external pilot supply, which shifts the internal poppet into an open position.
Pressure Compensated Priority Flow Control Valves
Pressure compensated priority flow control valves maintain constant flow regardless of changes to inlet pressure for flows up to 90 lpm (24 gpm) and pressures up to 420 bar (6000 psi); excess flow is diverted once the priority flow requirement is met.
Pressure Compensators/Control Elements
REGIONAL - Parker’s pressure compensator valves provide constant flow regardless of upstream or downstream pressure changes via a fixed or adjustable orifice. These valves can handle flows up to 150 lpm (40 gpm) and pressures up to 245 bar (3500 psi).
Pressure Switch - Series PSB
Electro-hydraulic pressure switches series PSB are robust, long-life high performance devices that provide an electrical signal when sensed pressure rises above or falls below the selected setting. The maximum operating pressure is 315 bar.
Proportional Pressure Reducing Valve Series - D1FV / D1FV*EE
The robust and durable proportional pressure reducing valve series D1FV in NG06 (CETOP 03) provides a very good pressure control behaviour. It is optionally available as explosion proof version according to ATEX and IECEx.
50 out of 210 Produkter
Parker offers a wide range of hydraulic valves for a variety of mobile and industrial applications. We manufacture all types of hydraulic valves: from directional control valves to pressure control, flow control, shuttle, sequence, high pressure non-return and ball valves, from monoblock and sectional to manifold mounted, in-line and slip-in cartridge valves, from standard on/off valves to high-dynamic proportional valves. Common to all is the combination of outstanding reliability and cost efficiency which makes them the appropriate solution for almost any operational purpose.