Vagttelefon:+45 70 24 45 18
Kundeservice +45 70 20 04 11
Om AVN Hydraulik | Kontakt
Parker's Low Pressure Parkrimp No-Skive hose 681 and 681DB according to EN 854 2TE with No-Skive hose construction is the ideal range for general low presssure hydraulic applications up to a temperature range of + 100 °C.
Wildcatter Oilfield Hot Oiler Hose is designed for high pressure transfer of hot oil and petroleum products in applications to 275°F and 2250 psi, Series 7301
Note: This product is no longer available – please refer to the “Recommended Products” section of this page for alternative products, or contact us for further assistance.
Predator® Sewer Jetting and Lateral Cleaning Hoses are designed for cleaning and debris removal in sewer lines.
Parker Ultra High Pressure 2740D/2748D/2749D hose handles pressures up to 40,000 psi (3,000 bar).
High Pressure Water Blast 2240D/2248D Hoses are developed for use as a high pressure tube cleaning hose and for ultra high pressure applications.
Parker 2380N/2388N waterblast hoses operate up to 18,000 psi (1200 bar) and are ideal for dirt and paint removal.
Parker 2640N/2648N ultra high pressure hoses handle pressures up to 26,000 psi (1,800 bar) in water jetting applications.
Ultra High Pressure 2640D waterblast hoses handles pressures up to 40,600 psi (4,000 bar).
High Pressure alternative to welded piping that requires costly labor & inspection and industrial grades of rubber hydraulic hose that are not designed or certified for subsea service.
Marine Power Tilt Hose features a polyurethane cover over a compact, abrasion resistant hose. It is designed for power tilt mechanisms, trim tab assemblies and jack plate assemblies.
With fast, accurate response and a corrosion resistant thermoplastic construction, the Parker MSH marine hose is ideal for marine hydraulic steering systems. MSH hose is salt water resistant and 1000 psi.
Parflex's global presence in the CNG market for natural gas vehicles and fueling stations allow OEM revenue growth by selling into multiple geographies given the CSA (NA) and ECR (EMEA) approvals on CNG Hose.
SCWV/SCBV Heavy Wall Convoluted PTFE Hoses feature a heavier wall than SCW/SCB hoses, allowing them to handle vacuum applications at elevated temperatures.
High Temperature Power Wash Hose is designed for use with low pressure power washers and carpet cleaning machines.
Parflex 578X Fast Response Hoses have a non-conductive nylon jacket designed to resist the flow of electrical current and a 5,000 psi constant working pressure.
Parker 2840D and 2848D hoses are developed for high and ultra high pressure applications handling pressures up to 58,000 psi (4,000 bar).
No-Skive Medium Pressure Hose 421SN, 421TC, 421RH , 421WC. According to EN 853 1SN - ISO 1436 Type 1. Working pressure: up to 22,5 MPa and a temp. Range: -40 °C up to +125°C. Compatible with No-Skive fittings in steel and stainless steel.
Parflex 575X Fast Response Constant Pressure Hoses are designed for applications such as offshore drilling, that require fast response times.
Parker 2440N waterblast hoses operate up to 20,000 psi (1400 bar) and are ideal for hydrodemolition applications.
Parker 2022N is a 10,000 psi constant pressure hose from Polyflex designed for hydraulic or oil and gas applications.
Parker 2380N and 2388N high pressure hydraulic hoses feature low volumetric expansion and are available as a twinline hose. Ideal for oil and gas applications.
Series 7311N/7311NXT Wildcatter Oilfield Multipurpose Fracking Hose is designed for high pressure transfer of abrasive slurries, drilling mud, fuel, mild chemical solutions, oil and water in applications to 200°F and 400 psi.
Carbo G NW/L 10 - NB/R 10 is designed to connect household appliances to the gas line or bottles.
Parker High Pressure ESH Hoses are developed for High and Ultra High Pressure applications, combining excellent handling and long service life with superior safety standards. For working pressure up to 25 MPa.
Parkers’ Breathing Air Refill Hose is a 7,000 psi working pressure hose. It complies with CGA G7.1-1 Grade E Breathing Air Standards and NFPA 1901 requirements for Fire Apparatus.
Note: This product is no longer available - please contact us for further assistance.
Parker ParLock Multispiral hose CEM69TC has been designed for conveyance of cement slurries at high pressure up to 69.0 Mpa. The hose range is comaptible with ParLock skive type fittings series V6.
Parker No-Skive Compact high temp hydraulic hose HT2 with 2 wire braids, designed for a working pressure up to 35,0 MPa and a temp. range from -40 °C to +125 °C - with peaks up to 135°C. Compatible with No-Skive fittings in steel.
Parker High Pressure Collapse Resistant HCR hose is specifically designed to serve the oil & gas market in subsea hydraulics. Its state-of-the-art construction provides a minimum crush resistance of 6,600 psi external pressure.
Parker No-Skive High Constant Pressure hose SX35LT is designed for high pressure hydraulic applications in extreme cold environment. Working pressure up to 35,0 MPa and temp range from -57 °C up to +100°C. Compatible with No-Skive fittings series 73.
Parker No-Skive High Constant Pressure hose SX42LT is designed for high pressure hydraulic applications in extreme cold environment. Working pressure up to 42,0 MPa and temp range from -57 °C up to +100°C. Compatible with No-Skive fittings series 73/77
PTFE hose with a nomex braid eliminates RFI issues and theyare also less susceptible to cracking from stress or flexing than metal hose assemblies.
Note: This product is no longer available - please refer to the “Recommended Products” section of this page for alternative products, or contact us for further assistance.
Parker Tough Cover Ultra High Pressure Water Jetting Hoses handle pressures up to 43,000 psi (3000 bar)
High pressure Polyflex hose with low volumetric expansion for offshore applications such as, control fluids, acidizing, methanol injection and well stimulation.
Parker high pressure mini hydraulic hoses feature a compact hose O.D. for use in mini-hydraulic applications under 7,000 psi.
Parker high pressure 2390N hydraulic oil and gas hose features low dimensional change under pressure resulting in excellent response times.
Parflex CNGRP hose is the only fully CSA listed fluid conveyance system that is flexible. The flexibility of the product provides reduced warranty costs versus stainless steel tubing in vibration/movement applications.
